Automatic Pet Blow Molding Machine
Product Description
Automatic Pet Blow Molding Machine1.Full automatic machine
2.Use for PET plastic bottle in all shapes.
3.Controlled by PLC
4.CE,ISO,SGS approved
Introduction:
KM-A2 full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmosphere pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe, reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost, high efficiency, easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install,test and start up.
14). Low rejection rate: less than 0.2 percent.
Pic:
Related Products
Trade Information
Cooperate Clients
Company Information
Zhangjiagang King Machine Co., Ltd,is a direct manufacturer and exporter specializing in water treatment plants, beverage Filling Machine, Packing Machine, bottle blowing machine, injection moulding machine and spare parts of filling line.
Our factory was established in the year of 1995, with the long history of accumulated experience in filling machine industry in south Jiangsu. There are many development engineer of filling machine in our company. We devote ourselves to the development, research and production of liquid food and beverage packing and filling industry.
King Machine cooperated with many customers in recent years, we win the trust of customers from our high-quality products. And we are looking forward to the future cooperation with you if our products can impress you deeply.
After Sale Service
1. We send the engineers to help installing, commissioning and training, the engineers start from our factory area.
2. We supply below necessary documents with the machine:
a. Machine layout
b. Electricity diagram
c. Machine certificate
d. General manual book/maintenance book Contact us if you need more details on Bottle Blowing Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Bottle Blowing Machinery、Bottle Making Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
2.Use for PET plastic bottle in all shapes.
3.Controlled by PLC
4.CE,ISO,SGS approved
Introduction:
KM-A2 full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Features of main body:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmosphere pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safe, reliable and unique design of the position of valve to make the pneumatic diagram in the machine easier to understand.
11). Low cost, high efficiency, easy operation and maintenance etc, profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any flaws.
13). Easy for you to install,test and start up.
14). Low rejection rate: less than 0.2 percent.
Model | KM-A2 | |
Productivity | Depend on bottle design | 1800-2000PCS/H |
Product type | Body diameter | 20mm-100mm |
Height | 50mm-350mm | |
Neck diameter | 15mm-38mm | |
Mold | Cavity | 2cavities |
Mold thick | 240mm | |
Mold | 500*500mm | |
Main machine power | Electrical source power | 380v 3Phase /220v 3Phase 50/60HZ |
Rated Power | 25kw | |
Really use power | 6kw | |
Air source | LP air compressor | 1.0m3/min 1.0MPa |
HP air compressor | 0.7m3/min 3.0MPa 2set | |
Air dryer | 1.0m3/min 3.0MPa 1set | |
Cooling water | Cooling water | 10L/min |
Size | L*W*H | 1908*1280*1920mm |
Weight | 2000kg | |
Auxiliary equipment(preform unscrambler) | L*W*H | 2000*950*2480mm |
Weight | 250kg | |
Resin available | PET |
Related Products
Trade Information
Trade Terms | EXW,FOB,CFR,CIF or others |
MOQ | 1set |
Port | Shanghai port |
Shipment | Ocean or air transportation |
Payment Terms | L/C,T/T, Western Union, MoneyGram |
Payment condition | 30%T/T |
Supply Capability | 1 Set/Sets per Month |
Lead Time | About 30 days |
Cooperate Clients
Company Information
Zhangjiagang King Machine Co., Ltd,is a direct manufacturer and exporter specializing in water treatment plants, beverage Filling Machine, Packing Machine, bottle blowing machine, injection moulding machine and spare parts of filling line.
Our factory was established in the year of 1995, with the long history of accumulated experience in filling machine industry in south Jiangsu. There are many development engineer of filling machine in our company. We devote ourselves to the development, research and production of liquid food and beverage packing and filling industry.
King Machine cooperated with many customers in recent years, we win the trust of customers from our high-quality products. And we are looking forward to the future cooperation with you if our products can impress you deeply.
After Sale Service
1. We send the engineers to help installing, commissioning and training, the engineers start from our factory area.
2. We supply below necessary documents with the machine:
a. Machine layout
b. Electricity diagram
c. Machine certificate
d. General manual book/maintenance book Contact us if you need more details on Bottle Blowing Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Bottle Blowing Machinery、Bottle Making Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Blow Moulding Machine
Premium Related Products
Other Products
Hot Products
Ointment Tube Filling MachineMultipurpose Filling Machine Honey Filling Machine Cream Filling MachineHX-009 The Plastic Tubes And Plastic-Aluminum Laminated Tubes Filling And Sealing MachineHX-003 Top Sale Cosmetic Tube Ultrasonic Sealing MachineAutomatic Mask Filling Sealing MachineHorizontal Automatic Flow Hard Candy Packing MachineHengxing Semi-Automatic Shrinking Packing MachineNew Paper Card and Plastic Blister Packaging Machineryhigh frequency pvc welding machine priceHigh Speed Automatic Plastic Blister Vacuum Forming Machine for PVC/PET/PS/PE/PP, CE ApprovedCool design welding machine price for Electronic ProductsSmall Size Semi-Automatic Cosmetic Tail Plastic Tube Sealer MachinePlastic egg tray forming machine with Factory price top qualityHigh Speed Automatic Soft Tube Filling and Sealing MachineBest Price Automatic Soft Tube Filling & Sealing Machine, Toothpaste Tube Filling Machine, Cream Filling and Sealing MachineAutomatic Tube Filling Sealing Machine HX-006